RG-8X By The Foot
UV-resistant white jacket, loss of 2.0 dB/100-ft. at 30 MHz.
Qty
Add
Buy RG-58 C/U By The Foot
RG-58 c/u coaxial cable is a high-quality cable for low- to medium-power HF applications. It has a non-contaminating, UV-resistant black jacket and a 19-strand, #20 center conductor. The characteristic impedance is 50 ohms and can handle up to 400 W at 30 MHz. Its outer diameter is only 0.195 inches and it is very flexible, making it very easy to use.
Qty
Add
Buy Marine Grade White RG-8X By The Foot
UV-resistant white jacket, loss of 2.0 dB/100-ft. at 30 MHz.
Qty
Add
Buy DRF-240 By The Foot
THE DRF EQUIVALENT TO LMR 240 - 15 AWG SOLID BARE COPPER, GAS INJECTED WHITE PE DIELECTRIC, FOIL WITH 38 AWG TINNED COPPER BRAID, BLACK PE JACKET TO .240" O.D.
Qty
Add
Buy BuryFlex By The Foot
Buy high quality Bury-Flex
Qty
Add
Buy DRF-400 By The Foot
Just .7 db loss per 100 feet at 30 MHz! Made in the USA!
DRF-400 is a direct equivalent to the popular brand of Times Microwave coax known as LMR-400. LMR-400 has been the gold standard in top quality coax for many amateurs look for high quality, low loss coax that is easy to work with and install. Simply put, LMR-400 has much improved loss charicteristics over RG-213 and RG-8 - while being nearly the identical size. LMR-400 has such great loss characteristics it is used by hams for both HF, VHF & UHF cable runs.
LMR-400, however, can be prohibitively expensive. In this case, by choosing DRF-400, you are saving nearly 22% over LMR-400 prices.
DRF-400 is a direct LMR-400 equivalent manufactured in the U.S.
Installing connectors is quite simple with the recommended (optional) tools and connectors (optional). Any regular PL-259 will work fine with this cable.
DRF-400 is manufactured by one of the most respected name in amateur radio wire and coax, Davis RF of Haverhill, NH. With over 20 years of experience in producing and engineering high quality cables like Bury-Flex (TM) and wire like Flex-Weave - their reputation is unparalleled. While supplies last get high a pre-cut section of DRF-400 sent to you now - make a 100' run or multiple jumper cables...perfect for whatever your needs might be.
Qty
Add
Buy RG-213 By The Foot
Buy high quality RG-213
Qty
Add
Buy LMR-240 By The Foot
UV-resistant polyethylene jacket, 1.3 dB/100-ft at 30 MHz.
Qty
Add
Buy RG-8 By The Foot
52 OHM COAX - 13 AWG 7/21 BARE COPPER; GAS INJECTED FOAMED PE; BARE COPPER BRAID 97% COV; BLACK PVC JACKET; .405" NOM OD; 82% VELOCITY
Qty
Add
Buy LMR-240 Ultra Flex By The Foot
Rubber outer jacket, 3.6 dB/100-ft at 150 MHz.
Qty
Add
Buy LMR-400 By The Foot
Buy high quality LMR-400 by the Foot
Qty
Add
Buy Marine Grade White RG-213 By The Foot
UV-resistant white jacket, attenuation of 2.8 dB/100-ft. at 150 MHz.
Qty
Add
Buy LMR-400 Ultra Flex By The Foot
Buy high quality LMR-400 ULTRA FLEX by the Foot
Qty
Add
Buy 1/2" Heliax - Andrew Hardline LDF4-50A
Buy 1/2" Heliax - Andrew Hardline LDF4-50A
Qty
Add
Buy Belden 9913F7 By The Foot
Buy high quality Belden 9913F7
Qty
Add
Buy LMR-600 By The Foot
Buy LMR-600 By The Foot
Qty
Add
1/2" RFS LCF12 50 Ohm Hardline by the Foot
This 50 ohm 1/2" hardline from RFS is an unbeatable value. It normally sells for more than $2.50 per foot. Upgrade your coax assemblies today. Whether your system is HF, VHF or UHF, with this hardline you will deliver more transmit power to your antenna system. Resources:See full product spec in new tab Buy UHF connectors for self install Attenuation db per 100 feet Hardline RG8X LMR-400 14 MHz .25 dB 1.2 dB .5 dB 30 MHz .36 dB 2.0 dB .7 dB 144 MHz .81 dB 4.5 dB 1.5 dB 440 MHz 1.4 dB 8.1 dB 2.7 dB 1000 MHz 2.19 db 14.5 dB 4.26 dB
Qty
Add
Add One Male UHF PL-259 and One Female UHF Female Connector Installed
Installed and soldered UHF PL-259 Male connector on one end of your assembly with a UHF Female Connector installed on the other end of the assembly.
Qty
Add
Add Standard (x2) PL-259 M Connectors Installed
Installed Pair of High Quality Silver & Teflon Male PL-259s. Perfect for LMR-400, LMR240, 9913,RG8X,BuryFlex,RG58,RG213 and RG8
Qty
Add
Add BNC Connectors - Male (x2) Installed
Add BNC Connectors (male) installed to each end of your coax assembly. 50 Ohm.
Qty
Add
Add BNC Connectors - Female (x2) Installed
Add BNC Connectors (female) installed to each end of your coax assembly. 50 Ohm.
Qty
Add
Add N Connectors - Female (x2) Installed
Add N Connectors (female) installed to each end of your coax assembly.
Qty
Add
Add One SMA Male and One SMA Female Connector Installed
Add One SMA Male and One SMA Female Connector Installed on each end of your assembly.
Qty
Add
Add SMA Connectors - Male (x2) Installed
Add SMA male connectors to each end of your assembly.
Qty
Add
Add One Male N Connector and One Female N Connector Installed
Add One Male N Connectors and One Female N Connector Installed - NOT FOR HARDLINE
Qty
Add
Add One BNC Male and One BNC Female Connector Installed
Add One BNC Male and One BNC Female Connector Installed on each end of your assembly.
Qty
Add
Add N Connectors - Male (x2) Installed
Add N Connectors (male) installed to each end of your chosen coax.
Qty
Add
Add SMA Connectors - Female (x2) Installed
Add SMA female connectors to each end of your assembly.
Qty
Add
Add Amphenol (x2) PL-259 M Connectors Installed
Installed Pair of Premium Amphenol Male PL-259s. Perfect for LMR-400, LMR240, 9913,RG8X,BuryFlex,RG58,RG213 and RG8
Qty
Add
Add Two Male N Connectors Installed
Add Two Male N Connectors Installed - FOR HARDLINE
Qty
Add
Add One Male N Connector and One Female N Connector Installed
Add One Male N Connectors and One Female N Connector Installed - FOR HARDLINE
Qty
Add
Add LMR-600 PL-259 M (x2) Loose - Premium
PL-259 Male Clamps x 2 for LMR-600. Connectors come loose and not installed. Solder-on-pins
Qty
Add
Add 1/2" Heliax PL-259 M Connectors (x2) Loose
PL-259 Male x 2 for Heliax. Connectors come loose and not installed.
Qty
Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>